 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CYStech Electronics Corp. 3-TERMINAL POSITIVE VOLTAGE REGULATOR Spec. No. : C525E3 Issued Date : 2003.04.02 Revised Date : Page No. : 1/3 PL7812XE3 Description The PL7812XE3 series of three-terminal positive regulators are available in the TO-220AB package. These regulators can provide TO-220AB local on -card regulation, eliminating the distribution problems associated with single point regulation. Each employs internal current limiting, thermal shutdown and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. PL7812XE3 is characterized for operation from 0C to +125C, and if operating temperature is always high, please refer to the power dissipation curve. Absolute Maximum Ratings (Ta=25C) * Input Voltage ....................................................................................................................... 35 V * Total Power Dissipation .................................................................................... Internally limited * Operating Temperature Range .......................................................................... 0 C to +125 C * Maximum Junction Temperature ..................................................................................... 125 C * Storage Temperature Range .......................................................................... -55 C to +150 C * Lead Temperature (Soldering 10S) ................................................................................. 230 C Typical Application Schematic Diagram Input Vin 1 PL7812 3 Vout 3.4K 6.3V 10K 1K 200 200 0.3 2K C1 2 C2 30K Output VREF 26 1.9K 20pF 4K Note: C1 and C2 are required if regulator is located far from power supply filter and load, or oscillation may induced on the loop. 26 4K 1.2 12.1K 1K GND PL7812E3 CYStek Product Specification CYStech Electronics Corp. Electrical Characteristics Vin=19V, Io=500mA, 0CTj125C (unless otherwise noted) Spec. No. : C525E3 Issued Date : 2003.04.02 Revised Date : Page No. : 2/3 Symbol Vo Vo Vo IQ IQ Vn RR VD Isc Ipk Vo / T Symbol Vo Vo Vo IQ IQ Vn RR VD Isc Ipk Vo / T Parameter Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Average Tc of Vout Parameter Output Voltage Line Regulation Load Regulation Quiescent Current Quiescent Current Change Output Noise Voltage Ripple Rejection Dropout Voltage Short Circuit Current Peak Output Current Average Tc of Vout Conditions Tj=25C 14.5VVin27V Tj=25C, 14.5VVin30V Tj=25C, 16VVin22V 5mAIo1.5A 250mAIo750mA Io1A, Tj=25C 5mAIo1A 14.5VVin30V Ta=25C, 10Hzf100KHz 15VVin25V, f=120Hz Tj=25C, Io=1A Tj=25C Tj=25C 0CTj+125C, Io=5mA Conditions Tj=25C 14.5VVin27V Tj=25C, 14.5VVin30V Tj=25C, 16VVin22V 5mAIo1.5A 250mAIo750mA Io1A, Tj=25C 5mAIo1A 14.5VVin30V Ta=25C, 10Hzf100KHz 15VVin25V, f=120Hz Tj=25C, Io=1A Tj=25C Tj=25C 0CTj+125C, Io=5mA PL7812A Units Min Typ Max 11.64 12 12.36 V 11.64 12 12.36 20 120 mV 16 60 120 mV 60 5.5 8 mA 0.5 mA 1.3 200 uV 68 dB 2 V 1.5 A 1.7 A -0.8 mV/C PL7812B Min Typ Max 11.5 12 12.5 11.4 12 12.6 44 240 16 120 45 240 16 120 5.5 8 0.5 1.3 300 62 73 2.5 1.5 1.7 -0.8 Units V mV mV mA mA uV dB V A A mV/C PL7812E3 CYStek Product Specification CYStech Electronics Corp. TO-220AB Dimension Marking: A D B E C Spec. No. : C525E3 Issued Date : 2003.04.02 Revised Date : Page No. : 3/3 7812 H I G 4 P M 3 2 1 N K Style: Pin 1.Vin 2.Ground 3.Vout 4.Ground 3-Lead TO-220AB Plastic Package CYStek Package Code: E3 O *: Typical DIM A B C D E G H Inches Min. Max. 0.2197 0.2949 0.3299 0.3504 0.1732 0.185 0.0453 0.0547 0.0138 0.0236 0.3803 0.4047 *0.6398 Millimeters Min. Max. 5.58 7.49 8.38 8.90 4.40 4.70 1.15 1.39 0.35 0.60 9.66 10.28 *16.25 DIM I K M N O P Inches Min. Max. *0.1508 0.0295 0.0374 0.0449 0.0551 *0.1000 0.5000 0.5618 0.5701 0.6248 Millimeters Min. Max. *3.83 0.75 0.95 1.14 1.40 *2.54 12.70 14.27 14.48 15.87 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: * Lead: 42 Alloy ; solder plating * Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: * All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. * CYStek reserves the right to make changes to its products without notice. * CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. * CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. PL7812E3 CYStek Product Specification |
Price & Availability of PL7812XE3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |